Sale!

2 Stage Aquarium Reverse Osmosis System

$169.99 $129.99 Sales Tax

Each Individually wet tested and Sanitized
1 micron sediment prefilter.
Very high efficiency 0.5 micron carbon prefilter
High silica and phosphate rejection TFC membrane.
Pressure gauge for easy monitoring.
Quick connect and disconnect John Guest Super Speed fit fittings.
All systems include a non-corrosive 3/4″ plastic garden hose adapter (non-brass).
Fully assembled, easy installation kit

Category:

2 stage aquariums reverse osmosis
The Ava Water Filter three-Stage Aquarium system also utilizes reverse osmosis to provide cleaning through a sediment filter removing contaminants as small as one micron. Further, a phosphate and silica membrane adds another layer of capture through a membrane design that lets water flow through, but not much else. The entire system is designed with a easy-to-use, compact design that takes little effort to install. The entire system, working in full mode removes up to 99 percent of impurities in regular municipal-fed water.
The four-stage design includes the following cleaning elements that fed water will go through:
•    Stage 1 – a pre-filter sediment blocker that removes contaminants before they even get into the system and cause clogging.
•    Stage 2 – Using reverse osmosis, the membrane filter takes out 98 percent of metals, salt, bacteria and any other contaminant in the water flow, many not visible to the naked eye.
All units are equipment with non-corrosive hosing and adapters so that connections do their job with water flow consistently. The unit will fit and work with any faucet that is designed with a ¾ inch hose thread end. If the faucet is different, then the user will need to obtain a faucet adapter for a proper connection.

Dimension : 181/2" x 181/2" x 181/2" Weight: 24 lbs
Bayside Aquarium Supply, Inc. warrants each new Reverse Osmosis & Deionization system to the original owner only to be free from defects in material and workmanship under normal use and conditions for a period of 90 days from the date of original purchase. Bayside’s liability under this warranty shall be limited to repairing or replacing on Bayside’s option, without charge, F.O.B. Bayside Aquarium Supply’s factory, any product of Bayside’s manufacture. Bayside will not be liable for any cost of removal, installation, transportation, or any other charges which may arise in warranty claim. NOTE: This warranty is void if the product is: 1) Damaged through abnormal operating conditions, accident, abuse, misuse, unauthorized alteration, or repair. This includes, but is not limited to, failure to regularly replace carbon and sediment filters. 2) Damaged by poor local tap water conditions. 3) Damaged due to connection of equipment other than supplied by Bayside Aquarium Supply, or modification by the user. 4) Damaged by hot water, freezing, flood, fire, or acts of God. This warranty is valid only in the U.S. and is non-transferable. No other warranties are expressed or implied and any other warranties required by law are limited in duration to 90 days. This product is not warranted for any specific purpose. Bayside Aquarium Supply will not be responsible for consequential damages arising from installation or use of the product, including any flooding which may occur due to malfunction or faulty installation including, but not limited to failure of installer to tighten all fittings. Gallons per day are not warranted since it is dependent on the users water conditions (i.e., temperature, pressure, and total dissolved solids).

Description

2 stage aquariums reverse osmosis
The Ava Water Filter three-Stage Aquarium system also utilizes reverse osmosis to provide cleaning through a sediment filter removing contaminants as small as one micron. Further, a phosphate and silica membrane adds another layer of capture through a membrane design that lets water flow through, but not much else. The entire system is designed with a easy-to-use, compact design that takes little effort to install. The entire system, working in full mode removes up to 99 percent of impurities in regular municipal-fed water.
The four-stage design includes the following cleaning elements that fed water will go through:
•    Stage 1 – a pre-filter sediment blocker that removes contaminants before they even get into the system and cause clogging.
•    Stage 2 – Using reverse osmosis, the membrane filter takes out 98 percent of metals, salt, bacteria and any other contaminant in the water flow, many not visible to the naked eye.
All units are equipment with non-corrosive hosing and adapters so that connections do their job with water flow consistently. The unit will fit and work with any faucet that is designed with a ¾ inch hose thread end. If the faucet is different, then the user will need to obtain a faucet adapter for a proper connection.

Related products